Return to index

The Environmental Reporter
January 2009 Volume 7 | Issue 1

I hope you're doing well and enjoying spring. I also hope you'll find the following article about decay fungi by Dr. Michelle Seidl, both interesting and useful.

With best wishes,
Dave Gallup

Decay Fungi Overview
By Dr. Michelle Seidl, EMLab P&K Mycologist

Every year an enormous amount of wood and wood products are destroyed by decay, rot and decomposition. Decomposition refers to the process by which tissues of dead organisms break down into simpler forms of matter. Such a breakdown is essential for new growth and development, because it is the basis for recycling limited chemical compounds, as well as freeing up limited physical space in the environment. Fungi are the main organisms responsible for wood decay. A wide range of fungi occur on wood using various constituents for their metabolism. This article is a general overview of the fungi, primarily basidiomycetes, involved in wood decay as it relates to structural integrity of building materials, buildings, milled wood and wood products.

Decay fungi need oxygen, water and a food source to exist. Wood as a food source is limited to those fungi which are able to utilize the components and in the process break down the wood. Since wood and wood products are used in construction of commercial and residential buildings, the key to longer lasting wood structures and products is to keep the wood dry. Dry wood will not decay. If you add water to dry wood, the cell walls absorb water up to a moisture content of about 28%. Above that, the wood reaches the fiber saturation point and free water becomes available. Decay fungi require free water so the moisture content of wood must be above 28% to decay. For practical purposes, a value of 20% is used as a cutoff, leaving a margin of error for avoidance of decay. Fungi have an external method for breaking down their food by secreting digestive enzymes and other chemicals into the substrate where they are growing. This enables the fungi to then absorb predigested food products. This external digestion process requires that liquid water be present so the enzymes can be secreted and then the useable food products can diffuse back into the fungus. Without this moisture, the fungus cannot be active or grow. Without water, it may either become dormant or die.

Wood decay is generally classified into two main groups, white rots and brown rots, based on the wood residue left behind following fungal digestion. Two other types include "dry rot", which is a form of brown rot caused by water-conducting decay fungi, and "soft rot", referring to decay caused by certain ascomycetes and asexual fungi (not covered here).

The main wood-inhabiting group of basidiomycetes are commonly known as the polypores. It's estimated that in North America, no less than 100 species of polypores cause decay in woody plants and timber, while approximately 75 species are responsible for 90% of the important decays produced in timber and wood products. Most polypores are saprophytic and utilize dead wood as their food source. These fungi commonly appear as hard, tough, corky, leathery or woody structures of various shapes and sizes (see figure 1). They have a fertile surface (where spores are produced), usually made of pores or tubes closely packed together. Polypores are mostly wood inhabiting fungi that are able to utilize components of wood as their primary source of energy for growth and reproduction. When a fruiting body is seen on wood, the mycelium, or main body of the fungus, is usually not so visible, growing within the wood obtaining nutrients from it.

Orange-brown polypore fungus (family Polyporaceae), with some leafy (

Figure 1: Orange-brown polypore fungus (family Polyporaceae), with some leafy ("foliose") green lichen, on the trunk of a dead tree. Winter, Mine Falls Park, Nashua, New Hampshire.
Source:, used with permission
Copyright © 2008 by Charles J. Bonner, all rights reserved

When fungi decay wood, the process involves breaking down complex chemical compounds, primarily cellulose and/or lignin. Cellulose is a polysaccharide composed of linear chains of glucose molecules. All plants have this chemical compound as the primary cell wall component. Cellulose is the most common organic compound on Earth and makes up roughly 50% of wood. Lignin is a complex polymer of phenolic units and relatively resistant to decay. It plays a key role in the carbon cycle as the most abundant aromatic compound in nature, providing a protective matrix in the plant cell wall. This amorphous and insoluble polymer is not susceptible to hydrolytic attack, in contrast to cellulose. Although lignin is a formidable substrate, its degradation by certain fungi was recognized and described nearly 125 years ago. These basidiomycetes are the only organisms capable of efficient depolymerization and mineralization of lignin.

White rot fungi primarily break down these lignin components in wood, and secondarily the cellulose. These fungi have extracellular enzymes such as cellulases and lignases to break down the complex molecules. Scientists have been studying these enzyme systems for industrial purposes and potential uses, including bioremediation. The wood decayed by white rot fungi results in a lighter colored wood, appearing bleached and paler than nondecayed wood. The consistency changes from hard to soft and fibrous, spongy, stringy or laminated. White rot fungi eventually decay the wood completely, and in nature, any residues left behind following the decomposition process are not useful in soil building. The strength factor of a structure being decayed by a white rot fungus is more slowly altered and frequently the rotting wood is still usable in the early stages of decay. White rot is more common in hardwoods (i.e. angiosperm wood such as oak (Quercus sp.)).

Preparing to remove old wood (white rot) from the Tumacacori Mission church at Tumacacori National Historical Park

Figure 2: Preparing to remove old wood (white rot) from the Tumacácori Mission church at Tumacácori National Historical Park, Arizona.
Source: National Park Service, Photo by Jana Tschopp

With brown rot fungi, cellulose is removed but the lignin remains behind. In advanced stages, the wood appears brown to dark brown in color and is often cracked cubically. The fibrous texture is lost early on in the decay process, due to the removal of cellulose. Brown rot is more common in conifer wood (i.e. gymnosperm wood such as pine (Pinus sp.) and fir (Abies sp.)). The brown rot residues left behind after the decay processes are important organic components of forest soils. These brown rot fungi are extremely important in recycling carbon in the ecosystem. Species of brown rot fungi are relatively few when compared to species of white rot fungi. Geographically, brown rot fungi become less numerous in the tropics when compared to temperate regions of the northern hemisphere.

Dry rot is a very efficient decay fungus with quite specific environmental requirements and is viewed by some as a subcategory of brown rot fungi. It has been referred to as a "house-destroying super organism." Much of the perplexities concerning dry rot stems from the rather confusing use of common names for describing building fungi. Dry rot in North America is Meruliporia incrassata, but also known by an older name, Poria incrassata, the water-conducting fungus. This is also known as 'poria fungus', undoubtedly due to the fact that in the early 1900's it was a member of the genus Poria. In the United States, this fungus seems to be more common in the southern states, but can be found worldwide. Though it may sound incorrect, dry rot fungi are known as water conducting. Actually this fungus differs from most other wood decay fungi in several respects. They can produce large, semi-tough, water-conducting, root-like structures called rhizomorphs. The structures transport water by capillary action from a constant source (usually damp or wet soil) to dry wood in a building. This dry wood becomes wet from the fungus when the rhizomorphs come in contact with the wood and decay is inevitably supported. As the decay proceeds, water is conducted to additional areas of dry wood adjacent to that which is already colonized. In this manner, as long as the supply of water is available, water-conducting fungi can colonize and decay the wood of the entire structure. In the UK, dry rot is a common name applied to Serpula lacrymans. This species was formerly known as Merulius. These fungi can digest both the lignin and the cellulose of wood. A small amount of this type of decay markedly alters the strength of wood.

No information is available for health effects, toxicity, or allergenicity with regards to these fungi. The actual damage that decay fungi cause in timber is enormous yet difficult, if not impossible, to accurately determine. Each year a large amount of timber is lost on account of decay fungi in forests as well as in and on wood products and structural timbers.

University of California Cooperative Extension: Meruliporia 'poria' incrassata (PDF, 1.5MB)

"Cellulose." Encyclopaedia Britannica. 2008. Encyclopaedia Britannica Online. 11 Jan. 2008

University of California Cooperative Extension: Moisture and fungi in homes: California issues (PDF, 2.3MB)

Gilbertson, R. L. and L. Ryvarden. 1986. North American Polypores. Vol I. Fungi flora: Oslo

Overholts, L. O. 1967. The polyporaceae of the United States, Alaska, and Canada. The University of Michigan Press: Ann Arbor

The data and other information contained in this newsletter are provided for informational purposes only and should not be relied upon for any other purpose. EMLab P&K hereby disclaims any liability for any and all direct, indirect, punitive, incidental, special or consequential damages arising out of the use or interpretation of the data or other information contained in, or any actions taken or omitted in reliance upon, this newsletter. Images included in this newsletter are property of EMLab P&K, unless otherwise specified.

EMLab P&K: When quality and accuracy are critical.